- Stock: In Stock
- Model: 801108
Synthetic rubber base Gummy Jelly is specially designed to align the nail plate! Best suited for problem nails! Gummy Jelly base is thick and does not spread much, forming a regular arch. The synthetic rubber element contained in this coating has a rubber-like consistency after drying in a lamp. Thanks to this, in case of an accidental impact, the nail will not break, but will bend and return to its original position due to the flexibility of the base coat.
Advantages
- Easy to apply
- Self-levelling
- Protects and strengthens nails
- Applied in 1 or 2 layers, depending on the situation
- Suitable for any gel system
- Average density base coat.
- Due to the medium consistency, it will be very convenient for the master to align and strengthen the nail plate
- Does not peel off during wear
Disadvantages
- Not solid material
- Not suitable for modelling on forms
Application
- Prepare the nail as in usual way
- Polish the surface of the nail with a rough buff
- Apply a thin layer of dehydrator to nails
- Apply a thin layer of ultrabond (primer) to nails
- Depending on the technique in which you will be working - apply a thin or medium layer of Gummy Jelly base coat
- Cure in a UV lamp for 2 minutes or 30 seconds to 1 min in LED/CCFL lamp, depending on the power of your lamp
- Continue your manicure design
Cure time
UV lamp 2min
LED/CCFL lamp from 30 seconds to 1 min, depending on the power of your lamp.
Removal
- Use an e-file device and appropriate bit to remove Gummy Jelly base coat.
- Use a 150/180 grit file to remove the base coat from the nail surface.
- It is also possible to soak in a special agent with an acetone content of at least 94%.
Attention: soaking (of any kind of coating) in such liquids with a high level of acetone is recommended only for beginner masters who do not yet have sufficient experience and knowledge of working with a manicure device and professional cutters!
Characteristics
Sticky layer - yes
Consistency - medium
Color - Transparent
Volume - 10ml
